We spent many hours on research to finding what psi should i set my kegerator to, reading product features, product specifications for this guide. For those of you who wish to the best what psi should i set my kegerator to, you should not miss this article. what psi should i set my kegerator to coming in a variety of types but also different price range. The following is the top 6 what psi should i set my kegerator to by our suggestions
799 reviews analysed
1. Karcher 15-Inch Pressure Washer Surface Cleaner Attachment, 3200 PSI Rating
- The Karcher Promise: Cleaner. Quicker. Delivers professional level cleaning over an area 15” wide with two spinning nozzles
- Cleans flat surfaces up to 4x faster than standard spray nozzles
- Compatible with gas power washers (up to 3200 PSI) with ¼” quick-connect fitting. Product dimensions(L x W x H): 15 x 15 x 6.7 inches
- Compatible machines g2700, g2700r, g2900x, g3000, g3000k, g3000 x, g3000 xk, g3100 xh, g3200 x, g3200 xk, g2200, g2600 vh, g3000 oh, g3050 ohc, g3200 oc, g3200 oct, g3200 oh, g3200 xc and g3200 xh
- Eliminates streaks by keeping the nozzles at a fixed height from the surface
- Perfect for cleaning large surfaces such as driveways, patios, decks, and sidewalks
- Also cleans vertical surfaces including garage doors and home siding
- Rotation speed (rpm): 1500 . Splash-free skirt keeps you dry while you clean
Karcher 15″ surface cleaner works in tandem with your gas pressure washer (up to 3200 PSI) to quickly deliver professional level cleaning without splash back. It cleans an area 15″ wide with two spinning nozzles instead of one, reducing your cleaning time, & eliminates streaks by keeping the nozzles at a fixed height from the surface. Also cleans vertical surfaces including garage doors & home siding. Quick connect for compatibility with a wide range of electric pressure washers. Get pro cleaning results with the help of karcher’s 15″ surface cleaner.
2. Thermaltake Smart 500W 80+ White Certified PSU, Continuous Power with 120mm Ultra Quiet Cooling Fan, ATX 12V V2.3/EPS 12V Active PFC Power Supply PS-SPD-0500NPCWUS-W
- Delivers 500 Watt Continuous output @ +40 degree. Compliance with Intel ATX 12 Volt 2.31 & EPS 12V 2.92 standards
- 80 PLUS Certified, 80percentage efficiency under typical load
- Supports (2) PCI E 6+2pin Connectors. Active (PFC) Power Factor Correction, MTBF: 100,000 hours
- Industry Grade Protections: (OPP) Over Power Protection, (OVP) Over Voltage Protection, (SCP) Short Circuit Protection
- High Quality Components
- Equipped with a powerful +12 Volt rail, superior performance under all types of system loading
- 5 Year Warranty
Incorporating various high-quality components, The smart series – models are Rated from 500W to 700W – saves energy through its high efficiency of up to 86% and accommodates any mainstream build with the most demanding requirements. An embedded intelligent cooling fan delivers excellent Airflow at an exceptionally low noise level. Additionally, the single +12V rail design enables non-stop usage with stable and reliable performance. Smart Series adopt 120mm cooling fan delivers excellent Airflow at an exceptionally low noise level. Smart Series saves energy through its high energy efficiency of up to 86% and is 80 PLUS standard Certified. High quality components enable non-stop usage with stable and reliable performance, no more capacitor explosion and leakage. Single +12V output.
short P/N: spd-0500p
type: Intel ATX 12V 2.3
max. Output capacity: 500w
dimension (H x W x D): 86mm x 150mm x 140mm
pfc （power factor correction）: active pfc
power good signal: 100-500 msec
hold up time: 16msec (minimum) within 60% load
input current: 8a max
input frequency range: 50 Hz – 60 hz
input voltage: 100Vac – 240vac
operating temperature: 5℃ to +40℃
operating humidity: 20% to 85%, non-condensing
operating temperature: -40 ℃ to +55 ℃
operating humidity: 10% to 95%, non-condensing
cooling system: 120mm fan: 1800 R.P.M. 10%
efficiency: 82-86% efficiency @ 20-100% load
mtbf: 100, 000 hrs minimum
safety Approval: CE/CB/TUV/ UL/ fcc
pci-e connector: PCI-E 6+2pin x 2
3. Jabsco 32605 Series Marine ParMax 4. GPM Washdown Pump Kit
4. Homecraft CBD5BS Black Stainless Steel Easy-Dispensing Tap Cooling System, Includes Reusable Growler, CO2 Cartridges, Removable Drip Tray & Cleaning Kit, Beer Fresh For 30 Days, 5-liter
- Compatibility: Works with ALL standard 5-Liter pressurized and non-pressurized gravity kegs, as well as the included reusable growler keg – perfect for hosting the big game or other small parties!
- STYLISH DESIGN: The black stainless steel gives it an elegant look, making it a good fit for any kitchen, bar, man cave, basement or garage!
- FRESH BEER AT HOME: Works with standard threaded CO2/N2O cartridges, helping to keep beer fresh for 30+ days
- Powerful thermoelectric cooling system: The LED adjustable temperature gauge ranges from 36 to 53 degrees and chills within 24 hours, keeping drinks ice cold
- Easy dispensing: The easy-tap handle allows for an easy pull and release dispense, pouring a consistent draft beer every time
- Reusable growler included: fill the reusable, plastic clear 5-Liter growler keg with your favorite beer to keep it fresh for long
- Quiet operation: no is no compressor or vibration, resulting in low noise
- Co2 cartridges: three 16g Co2 cartridges are included and will work with any standard threaded Co2 or N20 cartridges
- Removable drip tray: The stainless steel tray catches overflow of beer and removes for easy cleanup
- Cleaning kit: squeeze bottle Cleaning kit is included to keep beer lines fresh and clean
Refreshing craft beer straight from your countertop tap! Bring 5-liters of your favorite craft brew right into your kitchen, and keep it cold and fresh for 30+ days after tapping. Fill the included 5-Liter keg growler, or use any standard pressurized or non-pressurized mini keg. An easy-pull tap handle makes dispensing easy, while a removable drip tray catches any drips.
5. Kegco Full-Size Digital Homebrew Kegerator Dual Faucet Ball Lock Keg Dispenser Stainless
- DIGITAL TEMPERATURE CONTROL: With a digital LED display and intuitive controls, it is easy to set and verify the internal temperature of this home brew keg refrigerator. No more guessing what temperature the number on a manual dial will produce – simply press the up or down button, and the temperature is adjusted by one degree. You can view the temperature in Fahrenheit or Celsius on the clear digital display.
- WIDE ENOUGH TEMPERATURE RANGE TO DISPENSE OR FERMENT: Fan-forced cooling provides even cooling throughout the kegerator, and gives it one of the coldest temperature ranges of any keg cooler on the market today. The temperature can be set as low as 32 degrees to dispense ice cold home-brewed beer, or as high as 75 degrees to act as a fermentation chamber for your fermenting brew.
- LARGE INTERIOR: Store up to three Cornelius ball lock kegs in the HBK309S-2’s spacious interior, or use it to hold a 6 gallon bucket or carboy of fermenting homebrew. This keg refrigerator can even be used to store food and other beverages! It measures 33.25″ H x 23.6″ W x 23.6″ D.
- DEEP CHILL FUNCTION: At the push of a button, you can activate a Deep Chill function that forces the compressor to work continuously for up to 24 hours, quickly cooling down a warm beer keg. Once the keg has reached the desired temperature, you can push the Deep Chill button again to return the unit to it’s normal operation.
- CONVERTS TO A REFRIGERATOR WITH 2 SHELVES: We could all use a little more refrigerated storage! When you’re not using this kegerator to dispense home-brew beer, you can easily convert it into an all-refrigerator using the two included shelves. These shelves are adjustable, and can be placed far enough apart to accommodate 2-liter bottles or gallon jugs. Thanks to the HBK309S-2’s wide available temperature range, you can even use this unit to store bottles of wine!
The same great Kegco kegerators that you know and love – now specially designed for homebrewers! This HBK309S-2 Double Faucet Home-Brew Kegerator features the same attractive styling, digital functionality, and convenient drip tray, guard rail, and casters as our K309 draft beer dispensers, as well as a complete two-tap homebrew dispense system that allows you to tap two Cornelius ball lock kegs at a time. The home-brew dispense system includes a two-faucet stainless steel draft tower, premium two-product double gauge regulator, and glossy red 5 lb. aluminum CO2 cylinder.
6. Faria 19007 Kronos Water Pressure Gauge Kit 30 PSI-2"
A pressure gauge operates by sending a low amperage current through the gauges’ meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, ect. As the sender’s resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.
By our suggestions above, we hope that you can found What Psi Should I Set My Kegerator To for you.Please don’t forget to share your experience by comment in this post. Thank you!