Finding your suitable readers for craftsman power washer repair is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for craftsman power washer repair including detail information and customer reviews. Let’s find out which is your favorite one.
625 reviews analysed
1. Briggs & Stratton 6188 Pressure Washer Replacement Hose, 30-Feet
Feature
- Replaces worn or damaged hoses
- For use with cold-water pressure washers up to 3,000 PSI
- Equipped with a Dual O-Ring Sealing System, the 6188 replacement hose will remain secure on your device
- 30-foot hose connects to male M22 pump and spray gun fittings, making it compatible with most brands of pressure washers
- Genuine OEM replacement part
Description
The Briggs & Stratton 6188 Pressure Washer Replacement Hose will replace worn or damaged hoses in cold-water pressure washers up to 3,000 PSI. Equipped with a Dual O-Ring Sealing System, the 6188 replacement hose will remain secure on your device. This 30-foot hose connects to male M22 pump and spray gun fittings, making it compatible with most brands of pressure washers. Help keep your outdoor power equipment running at peak performance by ordering the Briggs & Stratton 6188 Pressure Washer Replacement Hose. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them also ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations. For more than a century, Briggs & Stratton branded engines and power equipment have helped consumers get the job done. Known for hard-working, dependable, efficient products, Briggs & Stratton is the world’s largest producer of gasoline engines for outdoor power equipment. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on all seven continents. Visit www.amazon.com/briggsstratton for more information on Briggs & Stratton and our extensive line of products.
2. B & S, Craftsman & Generac replacement pressure washer hose – Made in USA
Feature
- This Schieffer hose is Made in USA – Stamped on hose
- Also Fits Delta, Excell, Generac, Karcher, Ryobi & Troy Built light duty units
- Direct Replacement for these part #s B5642GS, B5693GS, 100512GS, 190249GS
- 3,000 PSI working pressure
- 1/4″ ID x 25′ long – Ends: (2) 22mm-14 Female twist connect
Description
Fits most pressure washers up to 3,000 PSI with standard 22mm connections
Schieffer textile braided hose is designed for use on gas or electric pressure washers with operating pressures of 3,000 PSI or less. Fits many DeVilbiss, Excell, Generac/Briggs, Karcher & Ryobi Light duty units with dual 22mm-14 female twist connects. Devilbiss & Excell # 17781, D28094 & D22166
Schieffer Makes The Hose – Schieffer isn’t just an assembler. Schieffer makes most hose stock in one of it’s modern, highly controlled, state of the art hose factories.
Number One – Schieffer has made more high pressure spray hoses than any other company in the world, Schieffer stands alone
Features:
Made in USA with high quality components
4:1 Burst to operating pressure
Smooth thermo plastic cover
Textile braided reinforcement
Seamless inner tube
Superior strength, ozone, abrasion and kink resistant
Specifications:
Hose: 1/4” ID x 25’ Long
Maximum Pressure: 3,000 PSI
Molded black bend restrictors on both ends
Ends: (2) 22mm-14 Female twist connects
Weight 2.0 lbs
3. Briggs & Stratton 6198 Pressure Washer O-Ring Replacement Kit
Description
The Briggs & Stratton 6198 Pressure Washer O-Ring Replacement Kit replaces worn, damage or lost o-rings in multiple components of pressure washers. Use this kit to restore the o-rings in pressure washer guns, hoses and wands. This replacement kit also includes (1) garden hose filter. Help keep your outdoor power equipment running at peak performance by ordering the Briggs & Stratton 6198 Pressure Washer O-Ring Replacement Kit. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them also ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations. For more than a century, Briggs & Stratton branded engines and power equipment have helped consumers get the job done. Known for hard-working, dependable, efficient products, Briggs & Stratton is the world’s largest producer of gasoline engines for outdoor power equipment. Briggs & Stratton products are designed, manufactured, marketed and serviced in over 100 countries on all seven continents. Visit www.amazon.com/briggsstratton for more information on Briggs & Stratton and our extensive line of products.
4. Twinkle Star 1/4-Inch 50 FT Pressure Washer Hose 3000 PSI for Sun Joe SPX Series, Karcher, B&S, Craftsman, Generac, Champion&Simpson and Others
Feature
- Both End: 1/4 inches diameter, M22 Metric Female Fitting
- Working Pressure: Maximum to 3000 PSI, Max. Temperature: 140℉ / 60℃.
- Fits most pressure washer and Sun Joe brand pressure washer
- Extend your working range with our 50 ft extension hose
- With 12 months product warranty, if you have any questions, please contact us, we would be more than happy to assist.
5. Tool Daily High Pressure Washer Hose, 25 FT X 1/4 Inch, 3600 PSI, M22 14mm or M22 15mm, Replacement Power Washer Hose for Most Brands
Feature
- Replacement pressure washer hose for Ryobi, Karcher, Honda, Troy Bilt, Simpson, Generac, Flexzilla, Craftsman, Green Work, Briggs and Stratton, Sun Joe, Dewalt and more. Fit most electric or gas pressure washer.
- High pressure hose has M22 female thread. Compatible M22 14mm and M22 15mm fitting. The adapter attached can change female M22 fitting to male M22 fitting.
- Pressure washer extension hose is non-kink, durable, weather and abrasion resistant.
- Pressure washer hoses is 25 FT X 1/4 Inch. Bend radius of the hose is 4.3 inch. The working pressure is up to 3000 PSI. Max. Temperature: 140℉ / 60℃.
- Application: Used for residential and light commercial washing, such as washing Car, Floors, Motorcycle, Windows, Siding, Driveways, Roofs and so on.
6. Tool Daily Pressure Washer Hose, 3/8 Inch x 50 FT, Quick Connect, 4000 PSI, High Tensile Wire Braided
Feature
- Pressure washer hose 50 FT is made from upgraded high tensile Steel-Wire Braid, Scuff and mark resistant construction for prolonged service life. No leaking.
- Max Working Pressure is up to 4000 PSI. Burst Pressure is up to 16000 PSI. Flow rate is from 2.5 GPM to 5 GPM. Max Temperature is up to 176 F.
- Power washer hose extension fits most pressure washer models. The 3/8 pressure washer hose has 3/8″ quick connect female socket and 3/8″ plug. Easy to connect and disconnect.
- Pressure washer hoses is 50 FT X 3/8 Inch. Bend radius of the hose is 4.7 inch.
- Application: 4000 PSI pressure washer hose is used for residential and commercial washing, such as washing car, floors, motorcycle, windows, siding, driveways, and roofs.
7. Tool Daily Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 190593GS 190635GS 203640GS
Feature
- Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer.
- 1/8’’ -27 male BSP thread.
- How to replace: Follow soap hose to end and you’ll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump. Put the soap hose back on.
- If the part on your pressure washer part is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set.
- Package List: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings.
8. 1/4 IN. x 50 FT. Pressure Washer Hose Replacement for B & S, Craftsman, Generac & Karcher". The manufacturer is "Propulse" and the brand is "Propulse
Description
Fits most pressure washers up to 3,000 PSI with standard 22mm connections
Schieffer textile braided hose is designed for use on gas or electric pressure washers with operating pressures of 3,000 PSI or less. Fits many DeVilbiss, Excell, Generac/Briggs, Karcher & Ryobi Light duty units with dual 22mm-14 female twist connects. Karcher replacement 50’ hose # 9.162-315.0, 91623150, 9.162-319.0,91623190
Schieffer Makes The Hose – Schieffer isn’t just an assembler. Schieffer makes most hose stock in one of it’s modern, highly controlled, state of the art hose factories.
Number One – Schieffer has made more high pressure spray hoses than any other company in the world, Schieffer stands alone
Features:
Made in USA with high quality components
4:1 Burst to operating pressure
Smooth thermo plastic cover
Textile braided reinforcement
Seamless inner tube
Superior strength, ozone, abrasion and kink resistant
Specifications:
Hose: 1/4” ID x 50’ Long
Maximum Pressure: 3,000 PSI
Molded black bend restrictors on both ends
Ends: (2) 22mm-14 Female twist connects
9. PEGGAS 25 ft. 3200 PSI High Pressure Power Washer Hose – M22 Connector – Replacement Hose – Gasoline – Electric Pressure Washer – Replacement for Ryobi – B&S – Craftsman – Karcher – Generac
Feature
- ✦ 25ft. REPLACEMENT HOSE- 3200 PSI Rated High Quality Deluxe – Hose Rated At 3200 PSI Made For Almost Any – Washer Cleaner – Pressure Washer Gun – Spray Gun – Portable Washer – On The Market
- ✦ UNIVERSAL M22 CONNECTORS- M22 Connectors Are Universal Connectors Use On Almost All Pressure Washer Pumps And Guns With Makes This A Great Product Without Having To Buy Anything Else To Make It Fit
- ✦ IDEAL USAGE- Ideal for Camper – Car Wash – Houses – Patio – Sidewalks – RV – RV Accessories – Camper Accessories – Motorhome – Yard Tools
- ✦ COMPATIBILITY – This Hose Fits Many Brands On The Market – Briggs Stratton – Husqvarna – Ryobi – Dewalt – Excell – Greenworks – Simpson – Please Double Check Your Connection For 100% Fitment
Description
NEW HIGH PRESSURE HOSE
For use with most gasoline pressure washers up to 3200 PSI Honda, Generac, Ryobi, Powerstroke etc. (Cold water use only)
This is a 25ft hose rated at 3200 PSI with M22 connectors for the High pressure gun and to the pump.
HOSE
Length (ft): 25 (ft
Diameter (in/mm): 0.25″ / 6
Max. Working Pressure (PSI): 3200
Connectors: M22
YOU GET FULL CUSTOMER SUPPORT TO ADVICE YOU ON ANYTHING YOU MIGHT NEED!
Please check your specifications before making the purchase.
Conclusion
By our suggestions above, we hope that you can found Craftsman Power Washer Repair for you.Please don’t forget to share your experience by comment in this post. Thank you!
