Top 7 Can Kegerator Controls Hurt Freezer

The Johnson Control’s A421 digital temperature controller is great for the brewers kegerator or keezer. You can use this to keep your beer or wine at exactly the temperature you like it. Excellent for fermenting lagers as well. The A421 Series controls are single stage, electronic temperature controls with a single-pole, double-throw (SPDT) output relay. The controls feature an adjustable backlit LCD for viewing the temperature and status of other functions, and a three-button touchpad for setup and adjustment. An LED indicates the On/Off status of the output relay. The A421 control is 120 VAC. The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable anti-short cycle delay, and a restricted user adjustment mode. The temperature units can be displayed in °F or °C. The temperature adjustment range is -40 to 212°F or -40 to 100°C. The A421 automatically changes from heating and cooling.

Safes provide the perfect environment for mold as they are dark, musty, and often times humid. Now imagine being able to leave your safe for 6-8 weeks at a time, knowing full well that all your moisture is being sucked out of the air. This is exactly what our friends over at Eva-Dry were thinking when they came up with the E333 Dehumidifier.
It’s so simple, you just hang the Eva-Dry in any enclosed space and the moisture is absorbed automatically, with no batteries to replace or cords to plug in. There is an indicator window with special “moisture meter crystals” that change from orange (when dry) to green (when wet) to indicate when the unit needs to be renewed. The unit will absorb approximately six ounces of moisture (depending on humidity levels, this should take between six to eight weeks). Once the moisture has been adsorbed, it cannot leak or spill. This unit uses a specially engineered crystallized silica gel that is odorless, non-toxic and completely safe
When the indicator crystals turn green, it is time to recharge the unit. Simply plug it into a power outlet or power strip in a well ventilated area (bathroom with extraction fan, garage, outside, etc.). There is a built-in heater that will warm the crystals allowing them to expand and release the moisture as water vapor into the outside air. It takes about 12 to 14 hours to completely recharge the unit. When it is completely renewed, the indicator crystals will change back to orange. The unit is again ready to absorb more moisture.

Specifications for the Eva-Dry E333 Wireless Dehumidifier
No batteries
No cord
Absorbs moisture
Renewable
5″ h x 6″ w x 1-1/2″ d

This mini dehumidifier has been design to adsorb moisture from small enclosed areas (maximum area: 10’x 10′). It will help protect clothes and valuables from the damaging effects of mold/mildew and moisture rot. It is 100% renewable and needs no power to operate. Just hang the eva-dry unit in a closet, or you can place it in other small enclosed spaces, and it will start to adsorb moisture. There are no batteries required or cords to plug in, the unit works without power. There is an indicator window with special “moisture meter crystals” that change from orange (when dry) to green (when wet) to indicate when the unit needs to be “renewed”. The unit will adsorb approximately 8 to 10 ounces of moisture (depending on humidity levels this should take between 3 – 8 weeks). Once the moisture has been adsorbed it cannot leak or spill. This unit uses a specialized engineered crystallized silica gel that is odorless, non-toxic and completely safe. When the indicator crystals turn Green it is time to “re-new” the unit. Simply remove the unit from where it is adsorbing moisture and plug it into a power outlet.

Don’t leave your draft beer taps defenseless against pesky fruit flies! The tap soother is a simple and affordable way to stop the all too common problem, before it starts. In addition to eliminating the tiny yet obnoxious pests, you’ll create a more sanitary environment and also prevent your faucet from sticking. The tap soother also helps to control the yeast and bacteria build-up inside and outside of your draft tap. You might think it’s a simple idea but in reality it’s a seriously effective solution. You’ll wonder how you ever served beer without it. In stock and ready to ship. Features: fits both domestic and European faucets. Made from food safe, durable rubber. Controls yeast and bacteria problems.

Product Description

The RANCO ETC-111000-000 Electric Temperature Control is a genuine OEM (original equipment manufacturer) replacement part. Ranco provides equipment to the commercial foodservice industry and is dedicated to quality designs. Use genuine OEM parts for safety, reliability, and performance.

From the Manufacturer

ETC-111000-000, ELECTRIC TEMPERATURE CONTROL. Ranco Genuine OEM replacement part. Ranco provides equipment to the commercial foodservice industry and is dedicated to quality designs. Use genuine OEM parts for safety reliability and performance.