Top 10 Alfa Romeo 4C Front View

This high-quality yet lightweight windshield Sunshade is an affordable way to protect the dash and other interior components from harmful UV rays while reducing the heat build-up in your vehicle.
They are custom cut using the latest in computer-aided cutting technology.
YelloPro Sunshades are reflective, insulating and custom fit for each car model.

INSTALLATION is easy and quick. Lay the sunshade across the dash. Lift up to the windshield smoothing the sunshade to the edges of the windshield. Lower the sun visors for support. Once installed it will measurably reduce the interior temperature at the dashboard. They are simple to use and they are just as easy to store.

PRODUCT STORAGE: When not in use, store your sunshade by rolling up from one end and then wrap with the attached velcro strap.

This beautiful, hard to find high resolution masterpiece is printed when you order and are never “off the shelf”. We use only the finest Kodak Paper and quality inks assuring you a lifetime of enjoyment.

This beautiful, hard to find high resolution masterpiece is printed when you order and are never “off the shelf”. We use only the finest 10 Mil Kodak Paper and quality inks assuring you a lifetime of enjoyment.

Framed Print Info

We offer prints framed in either of two frame types — light walnut or dark walnut. Both are 1″ wide, 3/4″ thick, smooth finish, wood composite with wood grain pattern. Please refer to the inset photos in the upper left side of the page.

Prints fit 1/4″ within the frame on each side. The frames are specified based on the print size they accept, so, e.g., a 12 x 18 frame accepts a 12 x 18 print, measures about 13.5″ x 19.5″ outside, 11.5″ x 17.5″ inside.

Mats are simulated and not linen material. When we print, we add a border based on the mat color choice you have made. The simulated mats have a slight texture, simulating a linen material. Examples can be seen in the photos in the upper left side of the page.

The prints are shipped with a non-glare glass or Plexiglas front. Mounting hardware is taped to the back. Once the mounting hardware is attached, the prints are ready to hang on the wall.

The only media we offer for framed prints is enhanced matte. Inasmuch as the prints are mounted behind glass (or Plexiglas), we feel that this media provides the best result.

Framed prints require 3 business days to ship.

Yorkim T10 194 LED Light Bulb Blue can fit numerous applications with T10, 921, 194 wedge base, design to replace W5W, 147, 152, 158, 159, 161, 168, 184, 192, 193, 194 2825, etc.
Replace your stock OEM yellowish tungsten lamps with Yorkim Blue T10 194 Lights for brighter, longer lasting and energy efficient performance.

Specifications:
1.For 12 volts
2.Number of Bulbs: 10pcs
3.LED Color: Blue
4.LED Type: T10 5050 High Power 5SMD-3CHIP Technology LED
5.Base Diameter: 9mm
6.Total Height: 28mm
7.Weight:1.45oz
8.Cross Reference: W5W 194 147 152 158 159 161 168 175 184 192 193 259 280 285 447 464 555 558 585 655 656 657 1250 1251 1252 2450 2652 2921 2825 921 906 579
9.Application: Common use for T10 LED Blue Interior Lights (such as Interior Dome Light, Interior Cargo Light, Interior Courtesy), Led Inside Lights, T10 LED License Plate Light, LED Side Lights, Led Car Panel Light ,Corner Light, Parking Light, Tail Light, Glove Box Lamp, Under Hood Lamp, Fog Lamp, Brake Light（Stop Lamp), & Backup Lights. Can be used on Car, Truck, Motorcycle, Scooter, Trailer, RV, Boat, Marine, etc..

Note:
Before purchase please verify your bulb is T10 194 921 Wedge Socket
Since the T10 194 LED Light Bulbs have lower power consumption, some newer vehicles (such as Mercedes Benz or other German brand cars) might pop up error message, may need to tap on Load Resistors to remove the error code on dashboard.
The T10 Light Led Bulb is polarity sensitive, if the bulb doesn’t light up, switch 180º to get the right polarity.
For any questions regarding compatibility / fitment, please feel free to contact us

Package Include:1 x Yorkim T10 194 Led Bulbs Car Blue（package of 10）

Customizable 9″ touchscreen We live in tablet times, and Alpine’s iLX-F259 multimedia receiver gives the people what they want – a 9″ touchscreen that “floats” over top other dash controls and fits in vehicles that previously couldn’t accommodate a comparable touchscreen receiver. Best of all, an oversized interface means you get big, intuitive controls and plenty of information at a glance, so it’s easier to keep your eyes on the road. Alpine has also made this receiver their most customizable, letting you drag-and-drop audio sources to create up to three home screens that you can swipe between. You can even personalize backgrounds with your own photos. This is your radio, your way, with all of Alpine’s trademark sonic capabilities and the very best smartphone integration. Works in most dashes The iLX-F259 comes in two main pieces: a 2″ tall chassis and a 9″ touchscreen. The chassis fits in most single-DIN dash openings, and since there’s no disc player, the mounting depth shouldn’t be an issue for most vehicles. Once you’ve mounted the chassis in your dash opening, you can choose from five available vertical mounting positions for the screen, giving you the flexibility to enjoy the radio without blocking essential dash climate controls. Your vents might be partially blocked, but Alpine designed the radio to function under typical in-vehicle temperatures. Adjust to your liking Once you’ve determined the best vertical position for the display, you also have the option of changing the screen viewing angle up to 45 degrees forward or 20 degrees backward. This allows you to accommodate for angled dashes or just to get a better look at your display, depending on its position in your dash. After you’ve chosen the best positions, four screws hold the display safely in place as you interact with it. All the options There’s no disc player in the iLX-F259, but it does include several ways to enjoy your media.

Product Description

Dual variable high/low electronic crossover & bass boost. Power on LED indicator. LED protection indicator. Blue LED level display. Tri-mode configurable. Dim: 2.7″H x 12″W x 10.9″D. 4 channel. 1,000W. 250W x 4 @ 4_. The Waterproof Marine Bridgeable MOSFET amplifiers extends the Pyle tradition into a totally new series of amps, designed from the ground up to deliver the power, performance and flexibility the modern car audio enthusiast demands. The PLMRA420 features 4 channels and 1000 watts of power.

Amazon.com

This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool–it’s completely waterproof. This four-channel, 1000-watt bridgeable marine amp takes both high- and low-level inputs, so it’s compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Comes with variable electronic crossover network, variable bass boost, and variable gain control for total control over your sound. A blue LED level display lets you keep an eye on your signal, and for protection, you can count on the thermal, overload, and short circuit protection. Runs on 12 volts DC.

Power your speakers on the dock, in your boat, or by the pool. Click here for a larger image

View a feature diagram. Click here for a larger image

Input Options

The PLMRA420 features gold-plated low-level RCA inputs for sources that use RCA-type connectors. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level MOLEX inputs.

Input Level Control

Adjust the line level input for the least amount of distortion to match your source unit.

Bass Boost

Add a little low-end boost with selectable bass boost of up to approximately 18dB at 60Hz.

High- and Low-Pass Filters

Optimize the output to match your speakers exactly, using the variable high-pass and low-pass frequency controls.

Crossover Mode Selector

Route the output of the low-pass or high-pass filters or the full signal to the internal power amplifier, or the full range if preferred.

Protection

Protect the amp and your vehicle’s electrical system from short circuit conditions with built-in fuse protection, along with overload, thermal and short circuit protection. LED lights indicate if the amp has gone into a protection mode. Finally, an anti-thump turn-on feature protects your speakers during power-up.

Pyle PLMRA420 Select Specifications

Power Rating:	250 Watts x 4 Maximum Output at 4 ohms 35 Watts x 4 RMS at 4 ohms 50 Watts x 4 RMS at 2 ohms
T.H.D:	<>
S/N Ratio:	> 95dB
Power Supply Voltage:	14.4V DC Neg. Ground (10.5-16V)
Frequency Response:	15 Hz-30 KHz
Input Impedance:	Low Level: 10K Ohms High Level: 100 Ohms
Input Sensitivity:	Low Level: 250mV High Level: 2.5V
Dimensions:	10.9 x 2.7 x 12 Inches (L x W x H)

What’s in the Box

Pyle PLMRA420 Amplifier, Mounting Hardware, User’s Manual

This beautiful, hard to find high resolution masterpiece is printed when you order and are never “off the shelf”. We use only the finest Kodak Paper and quality inks assuring you a lifetime of enjoyment.

This beautiful, hard to find high resolution masterpiece is printed when you order and are never “off the shelf”. We use only the finest Kodak Paper and quality inks assuring you a lifetime of enjoyment. Framed Print Info —– We offer prints framed in either of two frame types — light walnut or dark walnut. Both are 1″ wide, 3/4″ thick, smooth finish, wood composite with wood grain pattern. Please refer to the inset photos in the upper Left Front Side of the page. Prints fit 1/4″ within the frame on each Front Side. The frames are specifHupp based on the print size they accept, so, e.g., a 12 x 18 frame accepts a 12 x 18 print, measures about 13.5″ x 19.5″ outFront Side, 11.5″ x 17.5″ inFront Side. Mats are simulated and not linen material. When we print, we add a border based on the mat color choice you have made. The simulated mats have a slight texture, simulating a linen material. The prints are shipped with a non-glare glass or Plexiglas Front Side. Mounting hardware is taped to the back. Once the mounting hardware is attached, the prints are ready to hang on the wall. The only media we offer for framed prints is enhanced matte. Inasmuch as the prints are mounted behind glass (or Plexiglas), we feel that this media provides the best result. Framed prints require 3 business days to ship.

This beautiful, hard to find high resolution masterpiece is printed when you order and are never “off the shelf”. We use only the finest Kodak Paper and quality inks assuring you a lifetime of enjoyment. Framed Print Info —– We offer prints framed in either of two frame types — light walnut or dark walnut. Both are 1″ wide, 3/4″ thick, smooth finish, wood composite with wood grain pattern. Please refer to the inset photos in the upper Left Front Side of the page. Prints fit 1/4″ within the frame on each Front Side. The frames are specifHupp based on the print size they accept, so, e.g., a 12 x 18 frame accepts a 12 x 18 print, measures about 13.5″ x 19.5″ outFront Side, 11.5″ x 17.5″ inFront Side. Mats are simulated and not linen material. When we print, we add a border based on the mat color choice you have made. The simulated mats have a slight texture, simulating a linen material. The prints are shipped with a non-glare glass or Plexiglas Front Side. Mounting hardware is taped to the back. Once the mounting hardware is attached, the prints are ready to hang on the wall. The only media we offer for framed prints is enhanced matte. Inasmuch as the prints are mounted behind glass (or Plexiglas), we feel that this media provides the best result. Framed prints require 3 business days to ship.